Robust, versatile and durable, the Vacmaster 110V PTO is certified as L Class for efficiently extracting light hazardous dusts. With an integrated power tool take-off socket (110V), reinforced crush resistant hose, thick skinned stainless steel tank and 5m cable, the 110V has been engineered to meet electrical safety standards for construction sites and workshops. L Class is intended for use with light hazardous materials such as soft woods and is certified to be suitable for workplace exposure limits (WEL) that are greater than 1 milligram per cubic metre. The 1000W single stage motor delivers an impressive 200 air watts of suction power. And like all Vacmaster motors - is built to last. Designed to a professional specification, the 15” floor suction nozzle; stainless steel suction tubes, air-flow control handle, and 30 litre tank with drainage port, help you clean quickly and safely. With minimum downtime.
Order by 12pm for same day dispatch
Free Next Day Delivery
1. 110 Volt 16A Supply System
110V plug and PTO socket. Manufactured to meet the UK Health and Safety Executive guidelines for safe, portable electrical equipment. This vacuum cleaner operates from a 110V (CTE) isolating transformer so that the maximum voltage to earth does not exceed 55 Volts.
2. L Class Dust Extraction
Independently tested as Class L for the collection of light hazardous dusts, including soft woods, gypsum, plasterboard and Corian. Effective and reliable extraction that is suitable for lower-toxicity dusts with a workplace exposure limit (WEL) of greater than 1 mg/m3. Also features a HEPA 13 cartridge filter for removing at least 99.95% of dust and allergens as small as 0.3 microns in diameter, and a full tank diameter High-efficiency Cloth Pre-filter for an additional layer of protection.
3. Wet and Dry Extraction
Vacuums wet and dry areas. The washable pre-filter coupled with the washable cartridge filter captures dust either directly into the tank or into a fitted dust bag for hygienic disposal. Remove filters and slide on the foam filter to start extracting liquids.
4. Power Take Off
110V 16A power take-off socket for dust extraction as you sand or drill. Plug in your 110V power tool and connect up the suction hose. Use the power switch on your tool to remotely operate the vacuum cleaner. Features a delayed shut-off. This is where the vacuum continues to run for around five seconds after the power tool has been switched off, to clear both the tool and hose of any remaining dust.
5. Blower Function
Plug the suction hose into the exhaust port and turn your Vacmaster into a powerful blower to make light-work of sweeping chores.
6. Drainage Port
Unscrew the cap to safely empty the tank of liquid waste, without any heavy lifting.
7. Heavy Duty Construction
Thick skinned 30L stainless steel tank, metal swivel castors, lock-fit stainless steel suction tubes with air-flow control handle and toughened crush resistant hose.
In the box
Power Take Off
Max Vacuum Pressure
Handle with Airflow Control
Dimensions (Complete Unit)